Popular Post

Tuesday, November 30, 2010

HOW TO: Temporary Fix Battery Drain & iPhone overheat After Installing Ultrasn0w On Baseband 6.15

iPhone battery HOW TO: Temporary Fix Battery Drain After Installing Ultrasn0w On Baseband 6.15

If you are experiencing battery drain after installing ultrasn0w on baseband 6.15, here is a note from sherif hashim on the issue:

On a very important side note, before anyone starts to complain about battery drainage issues after installing the new ultrasn0w on the 6.15.00 updated BB, the culprit here is not ultrasn0w, it’s the hacktivation process (activating the phone by pwnage tool or redsn0w rather than using an official carrier sim to do so) that u mostly did while jailbreaking.

The 4.1 and 4.2.1 ipsws unlike their old ancestors, seem to keep looking for valid push certificates all the time, either thru your wifi, or thru your cellular data network (which u only have after installing ultrasn0w and hence u accuse it) , this can be seen clearly if u have a cellular working data plan for 3g or edge and you watched the settings > general > usage > cellular network data (sent & received are continuously increasing even without using any internet traffics on the phone) , this will also render the phone going hot even in stand by mode and also very rapid battery drainage occurs plus consuming ur data if you were not on an unlimited plan.

So to resolve this, you either:
A) try to activate the phone using the official sim if u have it (even if the sim itself is old and not working) , or borrow it from a friend if it’s possible, by any means, try to have an access to one and use it

B) if A is not feasible, u can install SBsettings from featured cydia packages and turn wifi and data off when u r not using it (shuts down both 3g and edge) , till C is done

C) there is a very nice module being worked on by a trusted jailbreak app dev, namely @sbingner, which will resolve that issue for those having it, the details of which shouldn’t be disclosed until he finishes his awesome work, till then, either use A or B to resolve the issue if it exists for you
sorry for the long post and thanks for your attention
 

Gluten-Free Hazelnut Crackers with Vegan Herbed Cream Cheese

Gluten free hazelnut cracker recipe with dairy free herb cream cheese spread and both recipes are vegan
Gluten-free hazelnut crackers and vegan herbed cream cheese.

Holiday fever has struck. The wheel of the year has turned once again and Winter Solstice is fast approaching. And that means party food, Dudes and Dudettes. Appetizing little bites of joy and peace. Gluten-free hazelnut crackers you can serve your guests without apology. Snowy soft herbed cream cheese you can offer your favorite vegan and your die-hard carnivore. That's right. Both. At once. To whet their appetite. A tease. A taste of deliciousness to get the festivities rolling.

And no one has to know how crazy easy it was to conjure these goodies. They'll just be totally impressed you made your own crackers. And after they try one? You might even score a kiss beneath the mistletoe.

You've got your mistletoe hung, right?


Continue reading

How to Use AirPrint with Any Printer

With iOS 4.2.1, Apple introduced the brilliant AirPrint. Unfortunately, you need to spend money on a few specific printer models if you want to enjoy AirPrint. Not anymore, thanks to a very simple hack that lets you use AirPrint on any printer, including printers that are not even wifi capabale.
If you’re on a Mac, you can use the hack called AirPrint Hacktivator, which like its name suggests, will enable printing via AirPrint in a matter of seconds…
1. Download the latest version of AirPrint Hacktivator
2. Unzip the AirPrint Hacktivator to your desktop or Applications folder, then run it
3. Slide the toggle switch in the app to ON, then enter your administrator password when prompted
4. Click OK to confirm
5. Now, go to System Preferences -> Print & Fax
6. Click the minus symbol to remove your printer, then add it back and check the box share it on your network (see video below for instructions)

Nice hack, isn’t it?

Baby Krishna Yashoda BalKrishna Janmashtami Myspace Pictures

Baby Krishna Yashoda BalKrishna Janmashtami Myspace Pictures Most Beautiful Krishna Yashoda Art Images Baby Krishna Graphics Krishna Eating Butter Images Best Krishna Child Photos Download Hindu God Krishna Wallpapers, Bala Krishna as Lord Krishna Prints, lord krishna janmashtami, paintings Kanha, lord krishna arjuna, lord radha krishna pictures, hindu lord Kanhaiya images, lord Govinda photos, lord krishna mantras, lord sri krishna Hi5 Friendster photos,

Baby Krishna Yashoda Love Graphics

Links to this Picture (Html Codes) (Copy/Paste into your own Website or Blog):

Lord Krishna desktop pictures, photos, pics, images, gopal krishna Wallpapers
Maa Yashoda Baby Krishna Graphics

Links to this Picture (Html Codes) (Copy/Paste into your own Website or Blog):

Most Beautiful Krishna Yashoda Animation Pictures Baby Krishna Hi5 Graphics
Bala Krishna Myspace Graphics

Links to this Picture (Html Codes) (Copy/Paste into your own Website or Blog):

Bala Krishna Lord Krishna pictures Lord Krishna Janmashtami Paintings Krishna
Child Krishna Pictures

Links to this Picture (Html Codes) (Copy/Paste into your own Website or Blog):

Yashoda Pictures Spiritual Images Religious Pictures Kanhaiya Photos
Baby Krishna Flute Hi5 Graphics

Links to this Picture (Html Codes) (Copy/Paste into your own Website or Blog):

God Krishna Wallpapers Janmastami Wallpapers Lord Krishna Stock Images
Lord Krishna Glitter Graphics

Links to this Picture (Html Codes) (Copy/Paste into your own Website or Blog):

Vasudeva and Devaki Gokul Paintings of Krishna Lila Hi5 Friendster
God Krishna Animated Graphics

Links to this Picture (Html Codes) (Copy/Paste into your own Website or Blog):

Free high quality lord krishna wallpapers lord krishna photos god krishna
Baby Krishna Stock Graphics

Links to this Picture (Html Codes) (Copy/Paste into your own Website or Blog):

Lord Sri Krishna Childhood picture wallpapers Hindu God Krishna Childhood pics
Baby Krishna Art Images

Links to this Picture (Html Codes) (Copy/Paste into your own Website or Blog):

Paintings of lord krishna Pictures Prints of lord krishna
Baby Krishna Animation Graphics

Links to this Picture (Html Codes) (Copy/Paste into your own Website or Blog):

Pictures of Krishna Krsna Rama Radha-Krishna Stock
Lord Krishna Paintings Graphics

Links to this Picture (Html Codes) (Copy/Paste into your own Website or Blog):

God Krishna Wallpapers Janmastami wallpapers lord krishna Pictures
Naughty Krishna Yashoda Graphics

Links to this Picture (Html Codes) (Copy/Paste into your own Website or Blog):


More... Lord Krishna Yashoda Pictures, Spiritual Images, Religious Pictures, Kanhaiya Photos, Bal Gopal Pictures, Myspace Orkut Friendster

Monday, November 29, 2010

HOW TO: Create A Custom Firmware and Jailbreak An iPhone 4 Running On iOS 4.2.1 Using An Unofficial PwngeTool Bundle

As always, we don’t recommend you to use unofficial bundles. You should wait on the iPhone DevTeam to drop an official tool. Here’s the story: this is not just a random bundle found on the internet. We made this bundle with our own two hands – and we used them to pull out all of our hair.
It’s still a tethered jailbreak, and you will need a way to boot into the jailbreaking kernel – redsn0w will not help you in this case.
NOTE: if you don’t like to mess with your iPhone – and even if you do – we don’t recommend you to use this bundle. We are not aware all ALL its bugs, so anything could go wrong at any time. We are not responsible for your mess-up. Wait on the iPhone DevTeam to drop an official release.
Requirments:
HOW TO Create A Custom Firmware:
1. Download everything on your desktop and extract archives
2. Right click on PwnageTool.app and ‘Show Package Contents’
3. Browse to Contents>Resources>Firmware Bundles> and copy the iOS 4.2.1 bundle you downloaded
4. Now close the window, load PwnageTool and create your custom firmware ( MAKE SURE you install OpenSSH in the process )
5. Once you have the custom firmware , load iTunes and click alt+restore ( hold the alt/option key and click on restore )
6. Browse for the custom firmware, select it, and wait for your iPhone to be restored
7. That’s it. Now you have a jailbroken iPhone 4 running on iOS 4.2.1 – except your iPhone won’t boot in the jailbreaking kernel and now the fun begins…
HOW TO Boot Into The Jailbreaking Kernel:
1. Download and install MacPorts
2. Install libUSB. Open terminal
sudo port install libusb
3. Duplicate your custom firmware and create a folder on your desktop called ‘ Tethereboot’ ( or whatever you want to call it – doesn’t matter )
4. Download the Thetherboot utility and put it in the Tethereboot folder
5. Take the duplicate custom firmware, change the extension from .ipsw to .zip and unarchive
6. Inside there’s two files that you need:
  • iBSS.n90ap.RELEASE.dfu
  • kernelcache.release.n90
Take them out and put them in the Tetherboot folder along side the tethereboot utility you just downloaded
tetheredboot HOW TO: Jailbreak An iPhone 4 Running On iOS 4.2.1 Using An Unofficial PwngeTool Bundle
7. Open Terminal , put your iPhone in DFU mode and type:
cd /User/Desktop/Tetherboot/
./tetheredboot iBSS.n90ap.RELEASE.dfu kernelcache.release.n90
tetheredboot 2 HOW TO: Jailbreak An iPhone 4 Running On iOS 4.2.1 Using An Unofficial PwngeTool Bundle
8. Ok, that’s it. Your iPhone will boot into the jailbreaking kernel.
9. Now you will have to SSH in and add Cydia by following this tutorial.
NOTE: again, if you don’t know what you’re doing DON’T DO THIS. Wait for the iPhone DevTeam to drop an official release
Massive thanks to hedsick

3Gs stuck after Redsnow here is solution.


3Gs stuck after Redsnow in aple logo. No problem just restore it with os 4.1 via itunes and jailbreak with redsow os 4.2.1 then your iphone version become 4.1 and baseband 6.15.00 after that.open cydia source add repo666.ultrasnow.com when done install reboot your iphone all done now your iphone is unlocked , do not forget to check on INSTALL CYDIA good luckand INSTALL IPAD BASEBAND in Redsn0w 0.9.6b5 good luck

by tsm2318

Dev-Team Releases Unofficial PwnageTool Bundle for iPhone 3GS

Update #3:  For those Mac users with an old-bootrom 3GS who really know what they’re doing, here’s a minimal 3GS 4.2.1 bundle that will get you to 4.2.1 without updating your baseband.  Be sure to uncheck “Activate the iPhone” using Expert mode.  To actually jailbreak after you’ve restored with the help of that bundle, please use redsn0w.  If you don’t know how to drop a bundle into PwnageTool.app, please hold off on 4.2.1 until it’s untethered for everyone
Posted here

>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
How to add Firmware Bundle to PwnageTool

Before I tell you some instructions on how to add a firmware bundle to PwnageTool.you will have to add the unofficial iPhone Dev-Team bundle that will let you to create a custom ipsw for the old bootrom iPhone 3GS that won't update your baseband when upgrading to iOS 4.2.1.

Here's some easy steps just follow me :


STEP 1 : First create a folder on your desktop called "Pwnage" then download Pwnagetool 4.1.3 from here into the folder after downloading You will also need to get the minimal iPhone 3GS bundle from here. Double click to extract it to the Pwnage folder.

 STEP 2 : after that double click to mount PwnageTool then drag the PwnageTool icon into the Pwnage folder.



 STEP 3 : Then right click to extract pwnagetool app after that choose show package contents from the menu that apper.


STEP 4 : Then navigate to Contents/Resources/FirmwareBundles/





STEP 5 : After that copy and paste the iPhone2,1_4.2.1_8C148a.bundle from the Pwnage folder on your desktop into the FirmwareBundles folder.



 STEP 6 : Almost done now launch PwnageTool from the Pwnage folder on your desktop and the application will detect your new firmware bundle.

Unlock 3gs/3g 4.1 BB 06.15 Complete Guide (without wifi or with wifi)

Requirements:

1. 4.1 firmware.
2. Redsn0w 0.9.6b5
3. Unlock 06.15 W/O wifi.


Easy Steps :

1. Open Redsn0w 0.9.6b5.
2. Browsing & select 4.1 firmware
3. The new message box will pop up so click YES
4. Click next
5. Check on INSTALL CYDIA and INSTALL IPAD BASEBAND
6. Again new message box will pop up so click YES
7. Click next
8. Follow introduction for DFU
9. Jailbreak Done !
10.( w/o wifi method) Extract Unlock 06.15 W/O wifi and open Unlock.bat
11. Reboot Device
12. Unlock Done !

With Wifi U can install ultrasn0w from (ultrasn0w.com) source. For Some country repo666 link blocked Can't add this source So you can add (http://iphone.gsm.vn) & install Ultrasn0w.

Unlock Done .
Other method for unlock without Wifi
Requirements:
1. 4.1 firmware.
2. Redsn0w 0.9.6b5

Easy Steps :

1. Open Redsn0w 0.9.6b5.
2. Browsing & select 4.1 firmware
3. The new message box will pop up so click YES
4. Click next
5. Check on INSTALL CYDIA and INSTALL IPAD BASEBAND
6. Again new message box will pop up so click YES
7. Click next
8. Follow introduction for DFU
9. Jailbreak Done !



1. Files for iphone AutoInstall folder from here


a:http://iphonefolders.com/1.0.32/iPhoneFolders.msi


b: unlock without WIFI.zip


2. now go through explorer and create a folder named ""AutoInstall"" in your iphone..


"iPhone\private\var\root\Media\Cydia\


and put these 2 files in your "AutoInstall" Folder
3. now restart 2 times....


done.....

Karina's Gluten-Free Potato Latkes


Nothing beats golden, crispy, lacy latkes.


A gluten-free favorite from the archives- these tender, lacy latkes are easy to make. Serve with homemade applesauce and sour cream spiked with a hint of horseradish or chives. And PS: I just passed my 5th year blog anniversary! Five years blogging gluten-free recipes.

Delicious thanks to all of you- much love xox Karina


Continue reading

HOW TO: Update / Unlock iPhone 3GS / 3G Baseband 06.15.00 with Redsn0w 0.9.6b5 on iOS 4.2.1 / 4.1 [Windows & Mac]

The new redsn0w 0.9.6beta5 is out. It gives both Windows and OSX users the ability to flash the iPad 06.15 baseband on iPhone3G or iPhone3GS. It fetches the baseband files directly from Apple for now (the only IPSW you ever point it at is the stock IPSW for the FW on your iPhone right now). There may be a long delay while it’s doing this (their servers are currently getting pounded).

WARNING — YOU DO THIS AT YOUR OWN RISK!  PLEASE UNDERSTAND THE CONSEQUENCES OF UPDATING TO 06.15.00
  1. There is no way to come back down from 06.15, and there’s no hiding the baseband version from Apple. You’ll be voiding your warranty in a very obvious way.
  2. If some future baseband comes out with a critical fix, you won’t be able to update to it if it remains down in the 05.xx sequence (then again, you wouldn’t update to it if you wanted to keep your unlock anyway).
  3. Starting with FW 4.2.1 if you have 06.15 on your iPhone you won’t ever be able to restore to stock firmware (it will fail).  You’ll need to only restore to custom IPSWs (then again, if you’re unlocker you should already be doing that).
********************************************
Unlockers have been reporting mixed results about GPS functionality at 06.15.00

Update #5: Unlockers have been reporting mixed results about GPS functionality at 06.15.00. Until we can track down what differentiates those who retain GPS vs. those who lose it, be conservative and assume you’ll lose GPS at 06.15.00. As we work on finding the cause (and possibly a fix), please report your personal findings in our comments section. (Update: early indications are that while 06.15.00 is capable of GPS, it will require some further hacks. But please still be conservative and assume you will lose GPS at 06.15, in case the hacks don’t work).
********************************************
BEFORE YOU START HERE A SPECIAL NOTE..

Originally Posted by voda66
guys its a good guide, but please dont update to 4.2.1 as it is tethered, you can still jb and unlock using 4.1 untethered, with the following simple tutorial

easy solution, if you are on 4.1 just download 4.1ipsw
1 :run redsnow select 4.1 ipsw wait for load up
2: tick install cydia and install ipad baseband
3: click next and wait for finish
4: run cydia and intall ultrasnow for unlock

tested on 5 handsets 3g/3gs working fine
*************************************************************
Temporary Fix Battery Drain & iPhone overheat After Installing Ultrasn0w On Baseband 6.15.0
If you are experiencing battery drain after installing ultrasn0w on baseband 6.15, here is a note from sherif hashim on the issue:

On a very important side note, before anyone starts to complain about battery drainage issues after installing the new ultrasn0w on the 6.15.00 updated BB, the culprit here is not ultrasn0w, it’s the hacktivation process (activating the phone by pwnage tool or redsn0w rather than using an official carrier sim to do so) that u mostly did while jailbreaking.

The 4.1 and 4.2.1 ipsws unlike their old ancestors, seem to keep looking for valid push certificates all the time, either thru your wifi, or thru your cellular data network (which u only have after installing ultrasn0w and hence u accuse it) , this can be seen clearly if u have a cellular working data plan for 3g or edge and you watched the settings > general > usage > cellular network data (sent & received are continuously increasing even without using any internet traffics on the phone) , this will also render the phone going hot even in stand by mode and also very rapid battery drainage occurs plus consuming ur data if you were not on an unlimited plan.

So to resolve this, you either:
A) try to activate the phone using the official sim if u have it (even if the sim itself is old and not working) , or borrow it from a friend if it’s possible, by any means, try to have an access to one and use it

B) if A is not feasible, u can install SBsettings from featured cydia packages and turn wifi and data off when u r not using it (shuts down both 3g and edge) , till C is done

C) there is a very nice module being worked on by a trusted jailbreak app dev, namely @sbingner, which will resolve that issue for those having it, the details of which shouldn’t be disclosed until he finishes his awesome work, till then, either use A or B to resolve the issue if it exists for you
sorry for the long post and thanks for your attention
*************************************************************

IF YOU STILL WANT TO UNLOCK


For whom is this Guide:This version of redsn0w 0.9.6b5 is developed ONLY for iPhone 3GS and 3G users who rely on unlock. Precisely,  This guide showing how to jailbreak and update baseband to 06.15.00 for ONLY iPhone 3GS and 3G who have unlocked devices.

Unsupported devices, what have to do:
iPhone 4 and 3GS users who don't rely on unlock, you can follow the same guide but with redsn0w 0.9.6b4 to jailbreak their devices on iOS 4.2.1, see guide Posted Here.

Here's the step by step guide:

STEP 1: Download redsn0w 0.9.6b5, 

STEP 2: Update to 4.2.1 firmware using the IPSW file you just downloaded via iTunes 10.1.

STEP 3: Launch Redsn0w 0.9.6b5,  and browse for iOS 4.2.1 firmware final version.
STEP 4: Now you have to select "Install Cydia" and "Install iPad baseband", and then click "Next" (in this step redsn0w will update your baseband to 06.15.00 which works with ultrasn0w 1.2)
STEP 5: Now make sure your device is both OFF and PLUGGED IN to the computer before you click “Next”.
STEP 6: At this stage you will need to put your iPhone in DFU mode by holding “Power” button and then while holding the “Power” button, you will now have to hold “Home” button too. Now after few seconds release “Power” button but keep holding “Home” button until installation begins.
 
STEP 7: You will Get a Jailbroken Device on the latest iOS 4.2.1  and the unlockable baseband 06.15.00

STEP 8: This step is only for these devices iPhone 4, 3GS (New Bootrom), iPod touch 4G,  3G, 2G, iPad. While this is tethered jailbreak and whenever you want to do anything related to jailbreak like SSH your device, or running Cydia, you must first run your device in the so called “jailbroken state” on every reboot by using “Just boot tethered right now” option.

3Gs stuck after Redsnow here is solution.

3Gs stuck after Redsnow in aple logo. first step-put iphone in dfu with redsnow and after that restore with itunes iPhone, with os 4.1 via itunes and jailbreak with redsnow os 4.2.1 then your iphone version become 4.1 and baseband 6.15.00 after that.open cydia source add repo666.ultrasnow.com when done install reboot your iphone all done now your iphone is unlocked , do not forget to check on INSTALL CYDIA good luckand INSTALL IPAD BASEBAND in Redsn0w 0.9.6b5 good luck

by tsm2318

How to: Unlock iPhone 3GS / 3G on iOS 4.2.1:

STEP 9: Once you jailbreak yoour device, you can now unlock your iPhone on baseband 06.15.00 using Ultrasn0w 1.2 from Cydia. To do so, follow the steps below:

  • Press to launch Cydia Installer from your SpringBoard.
  • Press to select the Manage tab at the bottom of the screen.
  • Press to select the Sources button
Click here to enlarge

  • Now touch on Edit and then on Add. You will be prompted to enter the URL of the source. Type http://repo666.ultrasn0w.com/ and touch on Add Source to add this repository.
Click here to enlarge

  • Once the source has been added press the large Return to Cydia button then select the Done button at the top right of the screen.
  • Now select repo666.ultrasn0w.com from the sources list and at last select ultrasn0w from the list of packages as shown below then install this application.
Click here to enlarge



STEP 10: Almost done, now simply reboot your iPhone and you should have a fully unlocked iPhone 3GS on iOS 4.1 or iOS 4.2.1.
Click here to enlarge




Download iOS 4.2.1 for iPhone, iPod touch and iPad
Download Redsn0w 0.9.6b5 for Windows
Download Redsn0w 0.9.6b5 for Mac
Download iTunes 10.1 for Windows or Mac

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Links for New Ultrasn0w 1.2 to Unlock for iPhone 3GS / 3G on iOS 4.2.1

Official Bittorrent ReleasesPwnageTool 4.1.3  - PwnageTool_4.1.3_Unlock_Edition.dmg.5994102.TPB.torrent
SHA1 Sum = adda6d882dce1b5117d01586037de289407e038a

Unofficial MirrorsThe following links are unofficial download mirrors, you download these archives at your own risk, we accept no responsibility if your computer explodes or if it becomes part of a NASA attacking botnet or even worse if your hands fall off mid-way during the use of these files. We do not check these links and we accept no responsibility with regard to the validity of the files, the other content that these links may provide or with the content that is on the third-party linked site.

http://8sv.de/dl/iphone/PwnageTool_4.1.3_Unlock_Edition.dmg
http://gumballtech.com/files/PwnageTool_4.1.3_Unlock_Edition.dmg
http://myblack.co.cc/PwnageTool_4.1.3_Unlock_Edition.dmg
http://cloud.xtra.me.uk/dev/PwnageTool_4.1.3_Unlock_Edition.dmg
http://xtra.me.uk/dev/PwnageTool_4.1.3_Unlock_Edition.dmg
http://www.zaone.ro/PwnageTool_4.1.3_Unlock_Edition.dmg
http://www.emreunal.com/PwnageTool_4.1.3_Unlock_Edition.dmg
http://www.cofo.us/idevice/PwnageTool_4.1.3_Unlock_Edition.dmg
http://ibloo.net/PwnageTool_4.1.3_Unlock_Edition.dmg
http://jacensolo.com/PwnageTool_4.1.3_Unlock_Edition.dmg
http://theplacefordee.com/PwnageTool_4.1.3_Unlock_Edition.dmg
http://loloke.hu/PwnageTool_4.1.3_Unlock_Edition.dmg
http://powerfree.pl/iphone/PwnageTool_4.1.3_Unlock_Edition.dmg
http://www.accesoriigsm.net/tools/PwnageTool_4.1.3_Unlock_Edition.dmg
http://cdn.nspwn.com/PwnageTool_4.1.3_Unlock_Edition.dmg
http://msby.org/iphone_dev/PwnageTool_4.1.3_Unlock_Edition.dmg
http://www.tomreinartz.com/DevTeam/PwnageTool_4.1.3_Unlock_Edition.dmg
http://iNeal.ME/up/pt413.dmg


.........................................................................................................

Video instructions for the above tutorial is embedded below:
Disclaimer: This guide is for testing & educational purposes only. I’m not responsible for any loss of important data or malfunctioning of your iPhone.

Sunday, November 28, 2010

IT IS HERE - - New Ultrasn0w 1.2 to Unlock for iPhone 3GS / 3G on iOS 4.2.1

First:The iPhone 3GS, 3G should be first jailbroken and upgraded 06.15.00 to use ultrasn0w unlock

HOW TO: Update iPhone 3GS / 3G Baseband to 06.15.00 and Unlock it

Unlocking requires that your iPhone is jailbroken. Follow the complete guide posted here to jailbreak your iPhone 3G / 3GS on iOS 4.2.1 (tethered) and iOS 4.1 (untethered) using Redsn0w or download PwnageTool from link given above and use it in Unlock edition to update the baseband to 06.15.00.

Just a couple of hours back, the iPhone Dev Team has updated their carrier unlock tool which brings unlock for iPhone 3GS & 3G on iOS 4.1 or iOS 4.2.1 but unfortunately, you have to update your device's baseband to 06.15.00 to be able to unlock it.

Simply follow the steps below to jailbreak and unlock your iPhone 3G on iOS 4.2.1 using PwnageTool 4.1.3 for Mac OS X.

STEP 1: Download PwnageTool 4.1.3 unlock edition from here.

STEP 2: Download iOS 4.2.1 for your device and also catch iOS 3.2.2 from here before it's removed (required to update the baseband). Then copy all the files to your desktop.

STEP 3: Now launch PwnageTool and select iPhone 3GS / 3G and point it to the original iOS 4.2.1 firmware you downloaded.

STEP 4: You'll now be asked if you want to update your baseband to the 06.15 version. If you are on 05.14 or 05.15 or higher you will need to do this to unlock. You do not need to do this for jailbreak only. Click on YES and then select Browse for IPSW and point it to iOS 3.2.2 you downloaded.
STEP 5: You'll have to choose some options as installing Cydia packages, custom logos and packages. Finally, hit the blue the build button.
STEP 6: You'll be asked to save the cooked firmware. Please allow up to 10 minutes.
STEP 7: When prompted if your iPhone has been Pwned before, we clicked No. It allows for a more thorough restore. Once done, follow the instructions seen on the screen to enter into DFU mode
STEP 8: Now, You will have to restore your iPhone to the jailbroken custom firmware by Clicking on the iPhone icon on the left sidebar of iTunes then hold left “alt” button (“Shift” button on Windows) on the keyboard and then click on “Restore” then release the alt button, Now Select the custom firmware created by PwnageTool and Let iTunes go in a bunch of steps.

How to: Unlock iPhone 3GS / 3G on iOS 4.2.1:

STEP 9:
Once you jailbreak yoour device, you can now unlock your iPhone on baseband 06.15.00 using Ultrasn0w 1.2 from Cydia. To do so, follow the steps below:
  • Press to launch Cydia Installer from your SpringBoard.
  • Press to select the Manage tab at the bottom of the screen.
  • Press to select the Sources button


  • Now touch on Edit and then on Add. You will be prompted to enter the URL of the source. Type http://repo666.ultrasn0w.com and touch on Add Source to add this repository. 


  • Once the source has been added press the large Return to Cydia button then select the Done button at the top right of the screen.
  • Now select repo666.ultrasn0w.com from the sources list and at last select ultrasn0w from the list of packages as shown below then install this application.

STEP 10: Almost done, now simply reboot your iPhone and you should have a fully unlocked iPhone 3GS on iOS 4.1 or iOS 4.2.1.

Unfortunately, iPhone 4 unlockers have to wait a bit longer before they can use their device on any carrier they like but at least they had promised to start working on that starting from tomorrow.

<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Original DEV-TEAM BLOG


Ultra-recycle 
Today we’re pleased to announce our free carrier unlock for iPhone3G/3GS owners with a baseband later than 05.13.04.  The unlock for that baseband exploited the AT+XAPP command, thanks to a crash initially discovered by @sherif_hashim (@Oranav also found this crash).  So what hole are we exploiting today, since Apple closed that AT+XAPP hole?  Well, we’re exploiting the exact same hole!

It turns out that the very first iPad firmware 3.2.2 has baseband version 06.15.00 still vulnerable to AT+XAPP. The iPad baseband is built for the exact same baseband chip as the iPhone3G/3GS — they’re fully compatible!  Some of us have been running 06.15 for weeks now on our iPhones in preparation for this release.


Since 06.15 is a higher version than 05.14 or 05.15 (where AT+XAPP is gone), anyone stuck at those versions can simply upgrade to 06.15 to unlock again!  Luckily for us, Apple *still* provides the iPad FW 3.2.2 with this vulnerable baseband right from their own servers. (Grab it now, before they take it down!)
We’ve been busy updating both PwnageTool and redsn0w to make the baseband update as seamless as possible.
  1. First up is “PwnageTool 4.1.3 Unlock Edition”.  It has a special dialog box which will ask you if you want to update to the iPad baseband.  You must already have the iPad 3.2.2 IPSW on your computer (see the above link)….so just point PwnageTool at it (or let it find it on its own if you’re in “simple” mode).
  2. Directly after PwnageTool 4.1.3 is available, the official ultrasn0w repo http://repo666.ultrasn0w.com/ will be updated with ultrasn0w 1.2, which covers iPhone 4 baseband 01.59.00 and iPhone 3G/3GS basebands 04.26.08, 05.11.07, 05.12.01, 05.13.04 and now 06.15.00.
  3. Finally, we’ll release an update to redsn0w today for those without Macs and can’t run PwnageTool.  The new redsn0w will give you the option to update your baseband to 06.15 too.
WARNING — YOU DO THIS AT YOUR OWN RISK!  PLEASE UNDERSTAND THE CONSEQUENCES OF UPDATING TO 06.15.
  1. There is no way to come back down from 06.15, and there’s no hiding the baseband version from Apple.  You’ll be voiding your warranty in a very obvious way.
  2. If some future baseband comes out with a critical fix, you won’t be able to update to it if it remains down in the 05.xx sequence (then again, you wouldn’t update to it if you wanted to keep your unlock anyway).
  3. Starting with FW 4.2.1 if you have 06.15 on your iPhone you won’t ever be able to restore to stock firmware (it will fail).  You’ll need to only restore to custom IPSWs (then again, if you’re unlocker you should already be doing that).
Certainly don’t update to 06.15 if you don’t need to!  Only do this if you need the unlock and you’re stuck on 05.14 or 05.15, and you’re willing to assume the above risks.


This PwnageTool also contains a 4.2.1 bundle for iPhone3G owners…for all else, it’s still only 4.1.  If you have an iPhone3GS with an old bootrom, the new redsn0w will handle 4.2.1 for you (in fact it covers 4.2.1 for all devices, even though some of them are still tethered at 4.2.1 until @comex can work some untethering magic).  iPhone3GS users with old bootroms who want to go to 4.2.1 should not use this PwnageTool!  


Update to stock 4.2.1 first, then use the upcoming redsn0w to update your baseband.
Please feel free to use our comments section for questions.  We have some very knowledgeable and helpful moderators:  angiepangie, Confucious, dhlizard, and Frank55!


Official Bittorrent Releases
PwnageTool 4.1.3  - PwnageTool_4.1.3_Unlock_Edition.dmg.5994102.TPB.torrent
SHA1 Sum = adda6d882dce1b5117d01586037de289407e038a

Unofficial Mirrors
The following links are unofficial download mirrors, you download these archives at your own risk, we accept no responsibility if your computer explodes or if it becomes part of a NASA attacking botnet or even worse if your hands fall off mid-way during the use of these files. We do not check these links and we accept no responsibility with regard to the validity of the files, the other content that these links may provide or with the content that is on the third-party linked site.

http://8sv.de/dl/iphone/PwnageTool_4.1.3_Unlock_Edition.dmg
http://gumballtech.com/files/PwnageTool_4.1.3_Unlock_Edition.dmg
http://myblack.co.cc/PwnageTool_4.1.3_Unlock_Edition.dmg
http://cloud.xtra.me.uk/dev/PwnageTool_4.1.3_Unlock_Edition.dmg
http://xtra.me.uk/dev/PwnageTool_4.1.3_Unlock_Edition.dmg
http://www.zaone.ro/PwnageTool_4.1.3_Unlock_Edition.dmg
http://www.emreunal.com/PwnageTool_4.1.3_Unlock_Edition.dmg
http://www.cofo.us/idevice/PwnageTool_4.1.3_Unlock_Edition.dmg
http://ibloo.net/PwnageTool_4.1.3_Unlock_Edition.dmg
http://jacensolo.com/PwnageTool_4.1.3_Unlock_Edition.dmg
http://theplacefordee.com/PwnageTool_4.1.3_Unlock_Edition.dmg
http://loloke.hu/PwnageTool_4.1.3_Unlock_Edition.dmg
http://powerfree.pl/iphone/PwnageTool_4.1.3_Unlock_Edition.dmg
http://www.accesoriigsm.net/tools/PwnageTool_4.1.3_Unlock_Edition.dmg
http://cdn.nspwn.com/PwnageTool_4.1.3_Unlock_Edition.dmg
http://msby.org/iphone_dev/PwnageTool_4.1.3_Unlock_Edition.dmg
http://www.tomreinartz.com/DevTeam/PwnageTool_4.1.3_Unlock_Edition.dmg
http://iNeal.ME/up/pt413.dmg


Always check the files that you have downloaded against our published SHA1 hash.
We would prefer that you downloaded the official bittorrent release that is linked above, but you are welcome to try these if you really must.

Mirror owners should email direct dmg download links only (no rapidshare type sites please) to blog@iphone-dev.org — please don’t place mirrors in the comments as they will be deleted.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

WARNING!!!!!

Update #1:  There’s an error in the bundle for the iPhone3GS 4.1 that prevents the new baseband from being used.  If you know your way around OSX, please download the fixed bundle, and unzip it if Safari hasn’t already done so.  Then “Show Package Contents” of PwnageTool.app, navigate to Contents->Resources->FirmwareBundles and drop it there.   Otherwise, please wait for the updated PwnageTool, or the OSX version of redsn0w coming soon.
WARNING!!!!!



The iPhone 4 users have to wait as the team will be working on unlock for iPhone 4 as Sherif Hashim (hacker) has already found an crash for iPhone 4 baseband 02.10.04 unlock.